Research Publications
Prof. Dr. Muhammad Aslam Bhutto
Journal Publication
- Rafi, M.M., Khan, S. and Bhutto, M.A. (2023) Assessment of Mechanical Properties of Adobe Masonry, Journal of Materials in Civil Engineering (Review completed; ready for publication)
2. Khan, S.U., Ayub, T., Bhutto, M.A., and Mustafa, A. (2023) Utilization of Tannery waste in Concrete, International Journal of Civil Engineering (Submitted in Dec 2022; under review)
3. Rafi, M.M. and Bhutto, M.A. (2023) Comparison of performance of analytical models for prediction of shear strength of steel plate girders, Structures and Buildings (Proceedings of the ICE) (Submitted in Aug 2022; under review).
4. Bhutto, M.A. and Rafi, M.M. (2023) Strengthening of slender webs of steel plate girders using fibre reinforced polymer composites, Journal of Composites for Construction (Submitted in May 2022; under review)
5. Bhutto, M.A., Nasir, M., and Marri, A. (2023) Impact Assessment of Construction Materials used in Water Supply & Sewerage Infrastructure, International Journal of Business and Management Sciences (Accepted for publication).
6. Bhutto, M.A., Khan, A. and Marri, A. (2023) Inflation and Its Impact on Highway Construction Materials, International Journal of Business and Management Sciences, (Accepted for publication)
7. Bhangwar, S.N., Memon, A.H., Bhutto, M.A., Rahman, I.A. and Memon, F.A. (2022) Risk Level of the Types and Causes of Claims in Construction Projects of Pakistan, Quaid-E-Awam University Research Journal of Engineering, Science & Technology, 20(01), 13-20.
8. Bhutto, M.A., Ahmed, K. and Aamir. M.U.B. (2022) Production and Optimization of Self-Healing Concrete by Using Indigenous Bacteria. International Journal of Biology and Biotechnology, 19 (4): 561-568.
9. Khan, H.M., Waseemullah, Bhutto, M.A., Khan, S.M. & Baig, M.A. (2022) Analysis of 3D Building Construction Applications in Augmented Reality. International Journal of Computer Science and Network Security, 22(10), 340- 346.
10. Kisaezehra, Farooq, M.U., Bhutto, M.A. & Kazi, A.K. (2022). Real-Time Safety Helmet Detection Using Yolov5 at Construction Sites. Intelligent Automation & Soft Computing, 36(1), 911-926
11. Beg, T., Siddiqui, M. O. R., Bhutto, M. A., Iqbal, K., & Sun, D. (2022). Utilization of textile denim sludge waste in high load-bearing structural applications. Polimery, 67(7-8), 298-307.
12. Rafi, M.M., Bhutto, M.A., and Aziz, T. (2022) Study of Strength and Durability Characteristics of Concrete Mixes Made by Unwashed Sea Sand as Fine Aggregates (2022) Advances in Civil Engineering Materials, 11(1), 321-338
13. Jakhrani, N. H., Mukwana, K. C., Bhutto, M. A., Mangi, D. M., & Hafeez, M. (2021). Analysis of the Physicochemical Characteristics of Distillery Wastewater at Habib Sugar Mills, Nawabshah. Engineering, Technology & Applied Science Research, 11(6), 7788-7792.
14. Jakhrani, A. Q., Jakhrani, S. H., Bhutto, M. A., Jatoi, A. R., Sandilo, U. G., & Ahsan, M. J. (2021). Performance Analysis of Solar Water Pumping System at Nawabshah. Quaid-E-Awam University Research Journal of Engineering, Science & Technology, Nawabshah., 19(2), 49-53.
15. Jakhrani, A. Q., Jatoi, A. R., Bhutto, M. A., Sahito, W. S., Soomro, A., & Shar,N. Z. (2021). Groundwater Quality Analysis of Different Villages in Two Union Councils of District Tando Muhammad Khan. Quaid-E-Awam University Research Journal of Engineering, Science & Technology, Nawabshah., 19(2), 8- 14.
16. Bangwar, D. K., Saand, A., Bhutto, M. A., Zardari, M. A., & Keerio, M. A. (2019). Reducing the Effect of Carbonation and Corrosion in Rice Husk Ash Concrete by Incorporating Polymer. Tehnicki Vjesnik-Technical Gazette, 26(3), 881-884.
17. Memon, A. H., Soomro, M. A., Lakho, N. A., Memon, A. N., & Bhutto, M. A. (2018). A Survey on the Criteria for Measuring the Profitability of a Construction Organization. Engineering, Technology & Applied Science Research, 8(3), 2879- 2881.
18. Memon, M. A., Bhutto, M. A., Lakho, N. A., Halepoto, I. A., & Memon, A. N. (2018). Effects of uncrushed aggregate on the mechanical properties of no-fines concrete. Engineering, Technology & Applied Science Research, 8(3), 2882-2886.
19. Memon, N. A., Larik, A. H., Bhutto, M. A., Lakho, N. A., Memon, M. A., & Memon, A. N. (2018). Effect of Prepackaged Polymer on Compressive, Tensile and Flexural Strength of Mortar. Engineering, Technology & Applied Science Research, 8(3), 3044-3047.
20. Jawaid, S., Ahmed, K., & Bhutto, M. A. (2018). Bio concrete: an overview. Int J Biol Biotech, 15(4), 801-813.
21. Memon, N.A., Abro, F.R., Bhutto, M.A. and Sumadi, S.R. (2015) Marble powder as stabilizer in natural clayey soils, Science International Journal, 27(5), p 4105- 4110
22. Ansari, A.A., Bhutto, M.A., Bhatti, N.K., and Memon, R.A. (2015) Strength of wall-slab junction with new form of shear reinforcement in a laterally loaded tall shear wall building, Journal of Civil Engineering and Architecture, 9(2), p193- 206.
23. Memon, N.A., Keerio, N.U., Bhutto, M.A. and Sumadi, S.R. (2014) Experimental study of compressive strength of resin grout with marble powder, European International Journal of Science and Technology (EIJST), 3(4), p87-95
24. Jatoi, A.R., Samo, S.R., Abbasi, H. and Bhutto, M.A. (2014) Monitoring and assessment of noise pollution: Case study of Cantonment railway station Karachi, Pakistan, Sindh University Journal of Research (Science Series), 46(1), p59-62
25. Bhutto, M.A., Ansari, A.A. and Memon, N.A. (2013) Prediction of behaviour of steel plate subjected to shear, International Journal of Engineering and Advanced Technology (IJEAT), 10(10), p1-5.
26. Ansari, A.A., Bhatti, N.K. and Bhutto, M.A., (2013) Suitability of pre-perforated post-reinforced baked clay beam panels for low cost housing, American Journal of Civil Engineering, 1(1), p6-15.
27. Ansari, A.A., Bhutto, M.A., and Bhatti, N.K. (2013) Mechanical system developed for performance evaluation of reinforced baked clay structural panels, International Journal of Emerging Technology and Advanced Engineering, 3(5), p791-797.
Dr. Abdul Salam Buller
Journal Publication
1. Buller, A. S., Abro, F.R., Lee, K. M., & Jang, S. Y. (2019). “Mechanical Recovery of Cracked Fiber-Reinforced Mortar Incorporating Crystalline Admixture, Expansive Agent, and Geomaterial". Advances in Materials Science & Engineering. (SCIE, I.F=2.09)
2. Buller, A. S, Abro, F.R, Ali, T, Jakhrani, S. H, Buller, A.H, Abdin, Z. U. "Stimulated autogenous-healing capacity of fiber-reinforced mortar incorporating healing agents for recovery against fracture and mechanical properties" Materials Science-Poland, vol.39, no.1, 2021, pp.33-48. (SCIE, I.F=0.90)
3. Abro, F.R.; Buller, A.S.; Lee, K.-M.; Jang, S.Y. “Using the Steady-State Chloride Migration Test to Evaluate the Self-Healing Capacity of Cracked Mortars Containing Crystalline, Expansive, and Swelling Admixtures”. Materials 2019, 12, 1865. (SCIE, I.F=3.74)
4. Abro, F.u.R.; Buller, A.S.; Ali, T.; Ul-Abdin, Z.; Ahmed, Z.; Memon, N.A.; Lashari, A.R. “Autogenous Healing of Cracked Mortar Using Modified Steady-State Migration Test against Chloride Penetration”. Sustainability 2021, 13, 9519. (SCIE, I.F=3.88)
5. Ali, T., Buller, A. S., Ahmed, Z., Shabbir, S., Lashari, A. R., & Hussain, G. (2022). “Investigation on Mechanical and Durability Properties of Concrete Mixed with Silica Fume as Cementitious Material and Coal Bottom Ash as Fine Aggregate Replacement Material”. Buildings, 12(1), 44. (SCIE, I.F=3.80)
6. Ali, T.; Saand, A.; Bangwar, D.K.; Buller, A.S.; Ahmed, Z. “Mechanical and Durability Properties of Aerated Concrete Incorporating Rice Husk Ash (RHA) as Partial Replacement of Cement”. Crystals, 2021, 11, 604. (SCIE, I.F=2.70)
7. Ali, Y., Irfan, M., Buller, A. S., Khan, H. A., & Gul, H. M. (2019). “A binary logistic model for predicting the tertiary stage of permanent deformation of conventional asphalt concrete mixtures”. Construction and Building Materials, 227, 116608. (SCIE, I.F=7.69)
8. Ali, Y., Hussain, F., Irfan, M, Buller, A. S. (2021). “An eXtreme Gradient Boosting Model for Predicting Dynamic modulus of Asphalt Concrete Mixtures”. Construction and Building Materials 295 (2021) 123642. (SCIE, I.F=7.69)
9. Lashari, A. R., Ali, Y., Buller, A. S., & Memon, N. A. (2022). “Effects of partial replacement of fine aggregates with crumb rubber on skid resistance and mechanical properties of cement concrete pavements”. International Journal of Pavement Engineering, 1-11. (SCIE, I.F=4.17).
10. Inam, M. A., Khan, R., Yeom, I. T., Buller, A. S., Akram, M., & Inam, M. W. (2021). “Optimization of antimony removal by coagulation-flocculation-sedimentation process using response surface methodology”. Processes, 9(1), 117. (SCIE, IF=3.35)
11. Buller, A. S., Ali. T, Abro, F. U. R., Shabbir. S, & Mastoi. S. (2022). “Effect of Silica Fume on Mechanical and Durability Performance Evaluation of Concrete”. QUEST-Research Journal, (Accepted for Publication)
12. Buller, A. S., Buller, A. M., Ali, T., Tunio, Z. A., Shabbir, S., & Malik, M. A. (2021). “Experimental Characterization of Bacterial Concrete Against Mechanical and Durability Performance. Engineering”, Technology & Applied Science Research, 11(1), 6703-6707.
13. Tunio, Z. A., Ali, T., Buller, A. S*., Abro, F. U. R., & Abbasi, M. A. (2019). “Influence of Coarse Aggregate Gradation on the Mechanical Properties of Concrete, Part I: No-Fines Concrete”. Engineering, Technology & Applied Science Research, 9(5), 4612-4615.
14. Gilani, E., Soomro, M. A., Ali, T., Sahito, A. A., & Buller, A. S. (2020). “Effect of Stress Relief on Pile Capacity in Soft Clay”. Indian Journal Of Science And Technology, 13(09), 1089-1097.
15. Memon, B. A., Oad, M., Buller, A. H., Shar, S. A., & Buller, A. S. (2019). “Effect of Mould Size on Compressive Strength of Green Concrete Cubes”. Civil Engineering Journal, 5(5), 1181-1188.
16. Buller, A. H., Memon, B. A., Buller, A. S., & Sodhar, I. N. “Modeling Fire Effect of Reinforced Recycled Aggregate Concrete Beams by Regression Analysis”. International Journal on Emerging Technologies 12(1): 97-102(2021).
17. Sodhar, I. N., Buller, A. H., Jalbani, A. H., & Buller, A. S. “Influence of COVID-19 on Study”. Journal of Critical Review, No. 01, Vol. 8, 2021.
18. Mastoi, S., Kalhoro, N. B., Mugheri, A. B. Buller, A.S, M., Rajput, U. A., Mastoi, R. B., & Mastoi, N. (2021). “A Statistical Analysis for Mathematics & Statistics in Engineering Technologies (Random Sampling). International Journal of Management, 12(3), 416-421.
19. Mastoi, S., Mugheri, A. B. M., Kalhoro, N. B. & Buller, A.S (2020). “Numerical solution of Partial differential equations (PDE’s) for nonlinear Local Fractional PDE’s and Randomly generated grids”. International Journal of Disaster Recovery and Business Continuity, 11(01), 2429-2436.
Conference Publication
1. Buller, A.S.; Abro, F.R.; Ali; Jakhrani, S.H and Buller, A.H., “Mechanical Performance Evaluation of Fiber Reinforced Mortar Incorporating Self-Healing Agents,” in 8th International conference of Asian Concrete Federation, Fuzhou, China, 2018, pp. 1161–1165.
2. Buller, A.S.; Lim, M.J.; Abro, F. R.; and Lee, K.M., “Evaluation of Self-Healing Performance of Fiber Reinforced Mortar Incorporating PVA Fibers PVA,” in Proceedings of the Korean Concrete Institute Conference, Andong, Republic of Korea, November 2017.
3. Abro, F. R.; Buller, A. S.; Jang, S. Y.; and Lee, K. M., “Evaluation of Self-healing Capacity of Cracked Mortars Incorporating Self-Healing Materials Regarding the Resistance to Chloride Penetration and Water Permeation” In the proceedings of 7th International conference on self-healing materials (ICSHM 2019), Yokohama, Japan, 2019 June 03-05, 2019.
4. Abro, F. R.; Buller, A.S.; Jang, S.Y.; and Lee, K.M., “Chloride Migration Coefficient of Cracked Mortar Incorporating Self- Healing Mate-rials” In the proceedings of International Conference on Sustainable Materials, Systems and Structures (SMSS 2019), Rovinj, Croatia, Mar. 20-22, 2019.
5. Abro, F. R.; Buller, A.S.; Jang, S.Y.; and Lee, K.M., “Evaluation of self-healing capacity of cracked mortars by the steady-state chloride migration tests,” in Sustainable Built Environment (SBE), Seoul, South Korea, December 2019.
6. Abro, F. R.; Buller, A.S.; Jang, S.Y.; and Lee, K.M., “Chloride Ion Migration Coefficient of Cracked Mortar Specimens Using Steady-State Migration Test Method” The 8th international conference of Asian concrete foundation (ACF 2018), Fuzhou, China, Nov 4-7, 2018.
Engr. Farhan Ahmed Shaikh
1. Yousfani, A.M.; KAMADA, T; KISHI, T; Shaikh, F.A. Incorporation of Bokashi Fermented Leaves (BFL) to improve the Algal Growth on Concrete Surface. Eng. Proc. 2022 (Accepted in MDPI, Engineering Proceeding)
2. Ahmed, F., Kumar, A., Hussain Rizvi, S., & Ahmed, S. (2021). Alkali-Silica Reactivity of Aggregates in Hyderabad-Jamshoro Region. International Research Journal of Modernization in Engineering Technology and Science, 03(02), 686–691. www.irjmets.com
3. Ahmed, S., Kumar, A., Rizvi, S. H., Ahmed, F., & Shahzeb. (2021). Early Stage Compressive Strength of Self Curing Concrete Enhanced with Polyethylene Glycol. IJSRD - International Journal for Scientific Research & Development, 8(12), 158–160.
4. Khuwaja, S., Kumar, A., Rizvi, S. H., Magsi, S., & Shaikh, F. (2021). Early Stage Performance of Self-Curing Concrete Using Poly Vinyl Alcohol. International Research Journal of Engineering and Technology (IRJET), 08(02), 1029–1034.
Dr. Abdul Munim Sathio
Journal Publication
.
Dr. Mohsin Ali Sathio
Journal Publication
.
Engr. Mohsin Ali
1. Aqsa Murad, Mohsin Ali, Aneel Kumar, Sadaqat Ullah Khan, Tehmina Ayub, “Parametric study on the Compressive Strength of Fly ash based Geopolymer Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.
2. Mohsin Ali, Aqsa Murad, “Effect of fly ash and silica fume on compressive strength of Autoclave aerated Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.
3. Aqsa Murad, Aneel Kumar and Mohsin Ali, “The way of production of Metakaolin from natural material Soorh for Geopolymer Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 205-210.
4. Mohsin Ali, Aneel Kumar, Rabindar Kumar, Aqsa Murad, “Utilization of Fly ash and Indus River Sand in Autoclaved Aerated Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 197-204.
Engr. Aqsa Murad
5. Aqsa Murad, Mohsin Ali, Aneel Kumar, Sadaqat Ullah Khan, Tehmina Ayub, “Parametric study on the Compressive Strength of Fly ash based Geopolymer Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.
6. Mohsin Ali, Aqsa Murad, “Effect of fly ash and silica fume on compressive strength of Autoclave aerated Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.
7. Aqsa Murad, Aneel Kumar and Mohsin Ali, “The way of production of Metakaolin from natural material Soorh for Geopolymer Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 205-210.
8. Mohsin Ali, Aneel Kumar, Rabindar Kumar, Aqsa Murad, “Utilization of Fly ash and Indus River Sand in Autoclaved Aerated Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 197-204.
9. Aqsa Murad, Muhammad Hassan, Aneel Kumar, “Seismic analysis of a High-Rise building: A case study”. 2nd International Conference on Sustainable Development in Civil Engineering 5th – 7th, December, 2019, (ICSDC2019).
Engr. Waqas raza
1. Raza W., Farooqui R., Saqib M., and Ahmmed R. R. (2022) “Identifying Building Information Modeling Potential for Construction Dispute Avoidance and Resolution” Presented at 12th International Conference on Construction in the 21st Century (CITC-12)
Engr. Syed Muhammad Yasir Ashrafi
2. Identification of Major Risk Events for Construction Industry Ashrafi, S., Farooqui, R. U. and Saqib, M. Presented at “Construction in 21st Century 12” Aman, Jordan, May 16-19, 2022
3. Water and Energy Retrofitting – A Case Study of Community Building Ashrafi, S., Farooqui, R. U. and Saqib, M. Presented at “Construction in 21st Century 12” Aman, Jordan, May 16-19, 2022