Journal Publications 

 

Prof. Dr. Sadaqat Ullah Khan

Journal Papers

TIEST Affiliation

 

 

1. Khan, S.U., Ayub, T. & Ahmed, B. Synergistic effects of PVA fibres and healing agent encapsulated gelatine carrier in cementitious composites. Innov. Infrastruct. Solut. 10, 166 (2025). https://doi.org/10.1007/s41062-025-01971-6
2. Chin, S. C., Shaaban, I. G., Rizzuto, J. P., Khan, S. U., Mohamed, D., Roslan, N. I. M., & Aziz, A. A. (2024, March). Predictive models for mechanical properties of hybrid fibres reinforced concrete containing bamboo and basalt fibres. In Structures (Vol. 61, p. 106093). Elsevier.
3. Khan, S. U., Ayub, T., & Khan, S. (2023). Performance of Epoxy-Injection and Microorganism-Based Crack-Healing Techniques on Cracked Flexural Members. Buildings, 13(11), 2697.
4. Montaser, W. M., Shaaban, I. G., Zaher, A. H., Khan, S. U., & Sayed, M. N. (2022). Structural behaviour of polystyrene foam lightweight concrete beams strengthened with FRP laminates. International Journal of Concrete Structures and Materials, 16(1), 1-20. IF=3.192
5. Khan, S. U., & Ayub, T. (2022). PET Fiber–Reinforced Engineered Geopolymer and Cementitious Composites. Journal of Materials in Civil Engineering, 34(3), 06021010. IF=1.984
6. Khan, S. U., & Ayub, T. (2022). Mechanical Properties of Hybrid Self-Compacting Fibre- Reinforced Concrete (SCC-FRC) Containing PVA and PP Fibres. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46(3), 2677-2695. IF=0.8
7. Ayub, T., Khan, S. U., & Mahmood, W. (2022). Mechanical properties of self-compacting rubberised concrete (SCRC) containing polyethylene terephthalate (PET) fibres. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46(2), 1073-1085. IF=0.8
8. Ayub, T., & Khan, S. U. (2022). Flexural Investigation of a/d Ratio for High-Strength PVA-FRC Beams Based on Experimental and Finite Element Analysis. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46(1), 717-732. IF=0.8
9. Shaaban, I. G., Said, M., Khan, S. U., Eissa, M., & Elrashidy, K. (2021). Experimental and theoretical behaviour of reinforced concrete beams containing hybrid fibres. In Structures (Vol. 32, pp. 2143-2160). Elsevier. IF=1.646
10. Khan, S. U., Afzal, A., Ali, S., Ayub, A., Shuja, A., & Shahid, M. A. (2021). Use of scrapped rubber tires for sustainable construction of manhole covers. Journal of Renewable Materials, 9(5), 1013. IF=1.34

Other Affiliation

9. Khan, S. U., Ayub, T., & Shafiq, N. (2020). Physical and Mechanical Properties of Concrete with Locally Produced Metakaolin and Micro-silica as Supplementary Cementitious Material. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44(4), 1199-1207. IF=0.8
10. Khan, S. U., & Ayub, T. (2020). Flexure and shear behaviour of self-compacting reinforced concrete beams with polyethylene terephthalate fibres and strips. In Structures (Vol. 25, pp. 200- 211). Elsevier. IF=1.646
11. Ayub, T., Khan, S. U., & Ayub, A. (2019). Analytical model for the compressive stress–strain behavior of PVA-FRC. Construction and Building Materials, 214, 581-593. IF=3.485
12. Ayub, T., Khan, S. U., & Shafiq, N. (2018). Flexural modelling and finite element analysis of frc beams reinforced with PVA and basalt fibres and their validation. Advances in Civil Engineering, 2018. IF=1.296
13. Khan, S. U., Ayub, T., & Shafiq, N. (2017). Comparison of Physical and Chemical Properties of Micro-Silica and Locally Produced Metakaolin and Effect on the Properties of Concrete. International Journal of Civil and Environmental Engineering, 11(8), 1085-1099.
14. Shafiq, N., Ayub, T., & Khan, S. U. (2016). Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite structures, 153, 30-41. IF=3.318
15. Khan, S. U., & Ayub, T. (2016). Modelling of the pre and post-cracking response of the PVA fibre reinforced concrete subjected to direct tension. Construction and Building Materials, 120, 540- 557. IF=2.296
16. Ayub, T., Shafiq, N., & Khan, S. U. (2016). Compressive stress-strain behavior of HSFRC reinforced with basalt fibers. Journal of Materials in Civil Engineering, 28(4), 06015014. IF=1.296
17. Shafiq, N., Nuruddin, M. F., Khan, S. U., & Ayub, T. (2015). Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81, 313-323. IF=2.296
18. Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2015). Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27(12), 04015034. IF=1.296
19. Khan, S. U., Nuruddin, M. F., Shafiq, N., & Ayub, T. (2014). Effect of metakaolin and PVA fibres on the workability and mechanical properties of concrete. In Advanced Materials Research (Vol. 935, pp. 188-192). Trans Tech Publications Ltd.
20. Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2014). Strength development of high- strength ductile concrete incorporating Metakaolin and PVA fibers. The Scientific World Journal, 2014. IF=1.219
21. Khan, S. U., Nuruddin, M. F., Ayub, T., & Shafiq, N. (2014). Effects of different mineral admixtures on the properties of fresh concrete. The Scientific World Journal, 2014. IF=1.219
22. Ayub, T., Khan, S. U., & Memon, F. A. (2014). Mechanical characteristics of hardened concrete with different mineral admixtures: a review. The Scientific World Journal, 2014. IF=1.219
23. Khan, S. U., Ayub, T., & Rafeeqi, S. (2013). Prediction of compressive strength of plain concrete confined with ferrocement using artificial neural network (ANN) and comparison with existing mathematical models. American Journal of Civil Engineering and Architecture, 1(1), 7-14.
24. Ayub, T., Shafiq, N., Khan, S. U., & Nuruddin, M. (2013). Durability of concrete with different mineral admixtures: a review. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 7(8), 265-276.
25. Khan, S. U., Rafeeqi, S. F. A., & Ayub, T. (2013). Strengthening of RC beams in flexure using ferrocement. Iranian Journal of Science and Technology. Transactions of Civil Engineering, 37(C), 353. IF=0.719
26. Khan, S. U., Nuruddin, M. F., Ayub, T., & Shafiq, N. (2013). Effects of ferrocement in strengthening the serviceability properties of reinforced concrete structures. In Advanced Materials Research (Vol. 690, pp. 686-690). Trans Tech Publications Ltd.
27. Memon, F. A., Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2013). Effect of sodium hydroxide concentration on fresh properties and compressive strength of self-compacting geopolymer concrete. Journal of Engineering Science and Technology, 8(1), 44-56.
28. Rafeeqi, S. F. A., Khan, S. U., Zafar, N. S., & Ayub, T. (2012). Implication of unbondedness in reinforced concrete beams. In Advanced Materials Research (Vol. 587, pp. 36-41). Trans Tech Publications Ltd.

Conference Publications

1. Ayub, T., Khan, S. U., & Mahmood, W. (2018). Behavioral Study of RC Beams Designed for Shear Using CFP and ACI Code Models. In MATEC Web of Conferences (Vol. 203, p. 06008). EDP Sciences.
2. Khan, S. U., Ayub, T., & Shafiq, N. (2017). Comparison of Physical and Chemical Properties of Micro-Silica and Locally Produced Metakaolin and Effect on the Properties of Concrete. International Journal of Civil and Environmental Engineering, 11(8), 1085-1099.
3. Ayub, T., & Khan, S. U. (2017, September). Finite element modelling of FRC beams containing PVA and basalt fibres: a comparative study. In AIP Conference Proceedings (Vol. 1872, No. 1, p. 020002). AIP Publishing LLC.
4. Shafiq, N., Ayub, T., & Khan, S. U. (2016, December). 3D nonlinear finite element analysis of

                   HPFRC beams containing PVA fibers. In Engineering Challenges for Sustainable Future: Proceedings of the 3rd International Conference on                           Civil, Offshore and Environmental Engineering (ICCOEE 2016, Malaysia, 15-17 Aug 2016) (p. 417). CRC Press.

5. Khan, S. U., Shafiq, N., & Ayub, T. (2015, July). Microstructure characteristics of concrete incorporating metakaolin and PVA fibers and influence on the compressive strength. In AIP Conference Proceedings (Vol. 1669, No. 1, p. 020017). AIP Publishing LLC.
6. Ayub, T., Shafiq, N., Nuruddin, M. F., & Khan, S. U. (2014). Mechanical properties of high- strength concrete reinforced with PVA and basalt fibres. In InCIEC 2013 (pp. 567-575). Springer, Singapore.
7. Ayub, T., Shafiq, N., Nuruddin, M. F., & Khan, S. U. (2014). Flexural behaviour of high performance Basalt fibre reinforced concrete beams: 3D nonlinear finite element analysis. In IEEE Colloquium on Humanities, Sci. Engg.
8. Khan, S. U., Nuruddin, M. F., & Shafiq, N. (2014). Strength Development of Concrete incorporating Metakaolin and PVA fibres. In Applied Mechanics and Materials (Vol. 567, pp. 505- 510). Trans Tech Publications Ltd.
9. Khan, S. U., Ayub, T., & Qadir, A. (2014). Effect of overloaded vehicles on the performance of highway bridge girder: A case study. Procedia engineering, 77, 95-105.
10. Nuruddin, M. F., Khan, S. U., & Shafiq, N. (2014). Effect of Calcined Kaolin on the Mechanical Properties of High-strength Concrete as Cement Replacing Material. In Applied Mechanics and Materials (Vol. 567, pp. 375-380). Trans Tech Publications Ltd.
11. Ayub, T., N. Shafiq, N., Nuruddin, M.F. & Khan, S.U. (2012, June) Numerical Modelling of High- Strength Ductile Concrete (HSDC) Beams. International Conference on Civil, Offshore & Environmental Engineering (ICCOEE) 2012, 12-14 June, 2012, Kuala Lumpur, Malaysia (ISBN No. 978-983-2271-77-2).
12. Rafeeqi, S. F. A., Khan, S. U., & Lodi, S. H. (2012). Performance of ferrocement as flexural strengthening in rural areas. In 10th International Symposium on Ferrocement and Thin Reinforced Cement Composites (Ferro10), Havana, Cuba (pp. 213-221).

Prof. Dr. Tehmina Ayub

Journal Publications

TIEST Affiliation

1. Mahmood, W., & Ayub, T. (2023). Mechanical properties and corrosion resistance of recycled aggregate concrete exposed to accelerated and natural marine environment. Journal of Building Engineering, 66, 105867.
2. Sheikh, M. D., Jamil, T., Ayub, T., Khan, A. U. R., Bilal, S. M., & Hu, C. (2023). Comparative Study on LC 3-50 with OPC Concrete Using Raw Materials from Pakistan. Advances in Materials Science and Engineering, 2023.
3. Sheikh, M. D., Jamil, T., Ayub, T., Khan, A. U. R., Bilal, S. M., & Hu, C. (2023). Comparative Study on LC 3-50 with OPC Concrete Using Raw Materials from Pakistan. Advances in Materials Science and Engineering, 2023.
4. Khan, S. U., Ayub, T., & Khan, S. (2023). Performance of Epoxy-Injection and Microorganism-Based Crack-Healing Techniques on Cracked Flexural Members. Buildings, 13(11), 2697.
5. Khan, S. U., & Ayub, T. (2021). PET Fibre Reinforced Engineered Geopolymer and Cementitious Composites. Journal of Materials in Civil Engineering. (IF=1.984)
6. Wajeeha Mahmood, Asad-ur-Rehman Khan, Tehmina Ayub, “Carbonation Resistance in Ordinary Portland Cement Concrete with and without Recycled Coarse Aggregate in Natural and Simulated Environment”, Accepted in Sustainability Journal
7. Sadaqat Ullah Khan and Tehmina Ayub, “PET fibre reinforced engineered geopolymer and cementitious composites: an innovative material”, Accepted in Journal of Materials in Civil Engineering (IF= 2.169)
8. Tehmina Ayub, Wajeeha Mahmood and Asad-ur-Rehman Khan; “Durability Performance of Self Compacting Concrete and Self Compacting Geopolymer Concrete Containing Recycled Concrete Aggregates: A Comparative Study” Sustainability Journal, 2021, 13, 8621 (IF: 3.251)

Other Affiliation

9. Sadaqat Ullah Khan and Tehmina Ayub, “Mechanical Properties of Hybrid Self- Compacting Fibre-Reinforced Concrete (SCC-FRC) Containing PVA and PP Fibres”, Published in the Iranian Journal of Science, Engineering and technology (Transaction of Civil Engineering) in 2021 https://doi.org/10.1007/s40996-021-00652-5 (IF: 1.465)
10. Wajeeha Mahmood, Asad-ur-Rehman Khan, Tehmina Ayub, “Mechanical and Durability properties of concrete containing recycled coarse aggregates”, Published in the Iranian Journal of Science, Engineering and technology (Transaction of Civil Engineering) in 2021 https://doi.org/10.1007/s40996-021-00692-x (IF: 1.465)
11. Tehmina Ayub, Sadaqat Ullah Khan and Wajeeha Mahmood; “Mechanical Properties of Self-Compacting Rubberised Concrete (SCRC) Containing Polyethylene Terephthalate (PET) Fibres”, Published in the Iranian Journal of Science, Engineering and technology (Transaction of Civil Engineering) in 2021 https://doi.org/10.1007/s40996-020-00568-6 (IF: 1.465)
12. Tehmina Ayub and Sadaqat Ullah Khan; “Flexural Investigation of a/d Ratio for High- Strength PVA-FRC Beams Based on Experimental and Finite Element Analysis”, Published in Iranian Journal of Science, Engineering and technology (Transaction of Civil Engineering) in 2021 https://doi.org/10.1007/s40996-020-00544-0 (IF: 1.465)
13. Tehmina Ayub, Asad-ur-Rehman Khan, and Wajeeha Mahmood, “Effect of Recycled Concrete Aggregates on Compressive Strength and Hydraulic Permeability of Concrete”, INTERNATIONAL JOURNAL OF ENERGY and ENVIRONMENT, Volume 14, 2020 (DOI: 10.46300/91012.2020.14.6)
14. Sadaqat Ullah Khan and Tehmina Ayub; “Physical and Chemical Characteristics of Locally Produced Metakaolin and Micro-Silica and their Effect on the Concrete Properties” Published in Iranian Journal of Science and Technology, Transaction of Civil Engineering”, 2020 (IF: 1.465)
15. Sadaqat Ullah Khan and Tehmina Ayub; “Flexure and shear behavior of Poly Ethylene Terephthalate (PET) fibres and strips in RC beams”, Published in Structure Journal, Volume 25, pp. 200-211, 2020 (IF: 1.646)
16. Tehmina Ayub, Sadaqat Ullah Khan and Ayesha Ayub; “Analytical Model for the Compressive Stress-Strain Behavior of PVA-FRC”, Construction and Building Materials, Volume 214, 30 July 2019, Pages 581-593
17. Tehmina Ayub, Sadaqat Ullah Khan and Nasir Shafiq; “Flexural Modelling and Finite Element Analysis of FRC Beams Reinforced with PVA and Basalt Fibres and their Validation”; Published in Advances in Civil Engineering Journal in 2018
18. Sadaqat Ullah Khan, Tehmina Ayub and Nasir Shafiq, “Comparison of Physical and Chemical Properties of Micro-Silica and Locally Produced Metakaolin and Effect on the Properties of Concrete”, Published in World Academy of Science, Engineering and Technology International Journal of Civil and Environmental Engineering Vol:11, No:8, 2017
19. Nasir Shafiq, Tehmina Ayub and Sadaqat Ullah Khan; “Investigating the performance of PVA and basalt fiber reinforced beams subjected to flexural action”; Published in Composite Structures Journal, Volume 153, 1 October 2016, Pages 30–41
20. Sadaqat Ullah Khan and Tehmina Ayub, “Modelling of the Pre and Post-Cracking Response of the PVA Fibre Reinforced Concrete Subjected to Direct Tension” Construction & Building Materials Journal (2016), pp 540-557
21. Tehmina Ayub, Nasir Shafiq, and Sadaqat Ullah Khan; "Compressive Stress-Strain Behavior of HSFRC Reinforced with Basalt Fibers." 10.1061/(ASCE)MT.1943- 5533.0001441 , 06015014”; Journal of Materials in Civil Engineering 2015
22. Nasir Shafiq, Muhd. Fadhil Nuruddin, Sadaqat Ullah Khan and Tehmina Ayub; “Calcined Kaolin as Cement Replacing Material and Its Use in High Strength Concrete,” Published in Construction and Building materials in 2015. [http://www.sciencedirect.com/science/article/pii/S095006181500197X]
23. M. Fadhil Nuruddin, Sadaqat Ullah Khan, N. Shafiq and Tehmina Ayub; “Strength Prediction Models for PVA fiber Reinforced High-Strength Concrete,” Published in Journal of Materials in Civil Engineering (ASCE) in 2015. [http://ascelibrary.org/doi/abs/10.1061/(ASCE)MT.1943-5533.0001279]
24. A.R. Khan and T. Ayub; “Performance of RC Beams Strengthened in Predominent Shear and Flexure Loading Regions using U-Shaped CFRP Anchorages and/or Strips”; Iranian Journal of Science and Technology, IJST, Transactions of Civil Engineering, Vol. 39, No. C1, pp 41-51
25. Tehmina Ayub, Nasir Shafiq, and M.F. Nuruddin; “Stress-Strain Response of High Strength Concrete and Application of the Existing Models”; Research Journal of Applied Sciences, Engineering and Technology; 8(10): 1174-1190, 2014
26. T. Ayub, N. Shafiq and M. F. Nuruddin; Effect of Chopped Basalt fibers on the microstructure and the mechanical properties of high performance fiber reinforced concrete (HPFRC); Published in the Advances in Materials Sciences and Engineering; Volume 2014 (2014), Article ID 587686, 14 pages, http://dx.doi.org/10.1155/2014/587686 [Scopus and ISI indexed; Impact factor: 0.897, ISSN: 1687-8434]
27. Nasir Shafiq, Tehmina Ayub and M.F. Nuruddin; “Predictive Stress-Strain Models for High Strength Concrete Subjected to Uniaxial Compression, In International Conference on Civil, Offshore & Environmental Engineering (ICCOEE) 2014, 3-5 June, 2014, Kuala lumpur, Malaysia. Published in Applied Mechanics and Materials, Vol. 567 (2014) Pages 476-481 (doi:10.4028/www.scientific.net/AMM.567.476)
28. Tehmina Ayub, Nasir Shafiq, and M.F. Nuruddin; “Analytical prediction of the mechanical properties of high performance PVA fiber reinforced concrete”, In International Conference on Civil, Offshore & Environmental Engineering (ICCOEE) 2014, 3-5 June, 2014, Kuala lumpur, Malaysia, Published in Applied Mechanics and Materials Vol. 567 (2014), Pages 345-350 (doi:10.4028/www.scientific.net/AMM.567.345)
29. S. U. Khan, M. F. Nuruddin, N. Shafiq, and T. Ayub, “Effect of metakaolin and PVA fibres on the workability and mechanical properties of concrete,” Advanced Materials Research Journal, Trans Tech Publications, Volume 935, pp. 188-192
30. M. Fadhil Nuruddin, Sadaqat Ullah Khan, N. Shafiq and T. Ayub; "Strength Development of High-Strength Ductile Concrete (HSDC) incorporating Metakaolin and PVA fibres"; The Scientific World Journal, vol. 2014, Article ID 387259, 11 pages, 2014. doi:10.1155/2014/387259. [Scopus indexed and Impact factor: 1.73, ISSN: 1537-744X]]
31. Sadaqat Ullah Khan, M. Fadhil Nuruddin, T. Ayub and N. Shafiq; “Effects of different mineral admixtures on the properties of fresh concrete”; Published in “The Scientific World Journal”; vol. 2014, Article ID 986567, 11 pages, 2014. doi:10.1155/2014/986567 [Scopus indexed and Impact factor: 1.73, ISSN: 1537-744X]]
32. T. Ayub, S. U. Khan and Fareed Ahmed Memon; “Mechanical characteristics of harden concrete with different mineral admixtures: A review”; Published in “The Scientific World Journal”, Volume 2014, Article ID 875082, 15 pages [http://dx.doi.org/10.1155/2014/875082; Scopus indexed and Impact factor: 1.73, ISSN: 1537-744X]
33. Tehmina Ayub, M.F. Nurrudin, Sadaqat Ullah Khan and Fareed Ahmed Memon; “Prediction of Compressive Strength of Plain Concrete Confined with Ferrocement using Artificial Neural Network (ANN)”; (special issues of the International Journal of Soft Computing and Software Engineering [JSCSE], Vol. 3, No. 3, Pages 663-667, 2013 [ISSN: 2251-7545 & DOI: 10.7321/jscse.v3.n3.101]
34. T. Ayub, N. Shafiq and S. U. Khan; “Durability of concrete with different mineral admixtures: A comparative review”; World Academy of Science, Engineering andTechnology International Journal of Civil Science and Engineering, Vol:7 No:8, 2013, Pages 1161-1172 [ISSN(P): 2010-376X ; ISSN (E): 2010-3778]
35. Sadaqat Ullah Khan, S.F.A Rafeeqi and Tehmina Ayub; "Strengthening of Reinforced Concrete Beams in Flexure Using Ferrocement"; Published in the Iranian journal of Science and Technology; Volume 37, C, Autumn 2013, Page 353-365
36. S.F.A Rafeeqi and Tehmina Ayub; “Behaviour of Reinforced Concrete Beams Detailed for Shear in Compliance with Compressive Force Path Method"; NED University Journal of Research Structural Mechanics Vol. X, No. 1, (July 2013) Pages 13-22 [ISSN 1023- 3873]
37. S.U. Khan, T. Ayub and S.F.A Rafeeqi; “Prediction of Compressive Strength of Plain Concrete Confined with Ferrocement using Artificial Neural Network (ANN) and Comparison with Existing Mathematical Models”, American Journal of Civil Engineering and Architecture, Vol. 1, No. 1, (2013) Pages 7-14 (ISSN (Online): Pages 2328-3998, DOI:10.12691/ajcea-1-1-2)
38. Sadaqat Ullah Khan, M.F. Nurrudin, Tehmina Ayub and N. Shafiq; “Effects of Ferrocement in Strengthening the Serviceability Properties of Reinforced Concrete Structures”; Advanced Material Research Journal Vols. 690-693, (2013) Pages 686-690, (ISSN: 1662-8985; doi:10.4028/www.scientific.net/AMR.690-693.686)
39. F. A. Memon, M. F. Nuruddin, S. Khan, N. Shafiq, T. Ayub; “Effect of Sodium Hydroxide Concentration on Fresh Properties and Compressive Strength of Self- Compacting Geopolymer Concrete”; Journal of Engineering Science and Technology Vol. 8, No. 1 (2013) Pages 44-56 (ISSN: 1823-4690)
40. S.F.A. Rafeeqi, S.U. Khan, N.S. Zafar and T. Ayub; “Implication of Unbondedness in Reinforced Concrete Beams”, Advanced Material Research Journal, Vol. 587, (2012) Pages 36-41 (ISSN: 1662-8985 & ISBN: 978-3-03785-513-3)
41. S.F.A. Rafeeqi and Tehmina Ayub; “Investigation of the versatility of theoretical prediction models for plain concrete confined with Ferrocement”; Asian Journal of Civil Engineering (Building And Housing) Vol. 12, NO. 3 (2011) Pages 337-352.

Conference Publication

1. Tehmina Ayub, Sadaqat Ullah Khan And Wajeeha Mahmood, “Compressive And Flexural Behaviour Of Self-Compacting Rubberised Concrete Containing PET Fibres”, The Fifth Australasia And South-East Asia Structural Engineering And Construction Conference (ASEA SEC 5), Emerging Technologies And Sustainability Principles In Structural Engineering And Construction Christchurch, New Zealand, November 30 - December 2, 2020
2. Tehmina Ayub, And Ayesha Ayub, “Effect Of Re-Entrant Corner Joint On The Seismic Behaviour Of Reinforced Concrete Building”, In The 1st South Asia Conference On Earthquake Engineering (SACEE’19), 21-22 February 2019, Karachi, Pakistan
3. Tehmina Ayub, Sadaqat Ullah Khan And Wajeeha Mahmood; “Behavioral Study Of RC Beams Designed For Shear Using CFP And ACI Code Models”; 4 Th International Conference On Civil, Offshore & Environmental Engineering (ICCOEE2018) Under The Banner Of World Engineering, Science & Technology Congress (ESTCON2018) Which Will Be Held From 13th – 14th August 2018 At Kuala Lumpur Convention Centre (KLCC), Malaysia.
4. Asad-Ur-Rehman Khan, Shamsoon Fareed And Tehmina Ayub; “Mechanical Properties Of Concrete Made Up From Recycled Coarse Aggregates”; 14th ASEC Conference In Jordan, 12-15 April 2018, Jordan
5. Tehmina Ayub And Sadaqat Ullah Khan, “Finite Element Modelling Of FRC Beams Containing PVA And Basalt Fibres: A Comparative Study”, 1 St International Conference On Mathematical Models & Computational Techniques In Science & Engineering, February 22-24, 2017, London, UK
6. Nasir Shafiq, Tehmina Ayub And Sadaqat Ullah Khan, “3D Nonlinear Finite Element Analysis Of HPFRC Beams Containing PVA Fibers", International Conference On Civil, Offshore & Environmental Engineering (ICCOEE2016) Under The Banner Of World Engineering, Science & Technology Congress (ESTCON2016), 15th - 17th August 2016 At Kuala Lumpur Convention Centre (KLCC), Malaysia, 417 -421
7. Sadaqat Ullah Khan, Nasir Shafiq And Tehmina Ayub; “Microstructure Characteristics Of Concrete Incorporating Metakaolin And PVA Fibres And Influence On The Compressive Strength”; 23rd Scientific Conference Of The Microscopy Society Malaysia; 10-12th December, 2014; Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronh, Perak, Malaysia [AIP Conference Proceedings 1669, 020017 (2015); Doi: 10.1063/1.4919155]
8. Sadaqat Ullah Khan, Tehmina Ayub And Adnan Qadir; “Effect Of Overloaded Vehicles On The Performance Of Highway Bridge Girder: A Case Study”; Published In The Procedia Engineering, Volume 77, Pp. 95-105, 2014 (Fourth International Symposium OnInfrastructure Engineering In Developing Countries (IEDC-2013); Pakistan, 26-28 December, 2013)
9. Tehmina Ayub, Nasir Shafiq, M.F. Nuruddin; “Mechanical Properties Of High-Strength High Performance Concrete Reinforced With Basalt Fibres”; Published In The Procedia Engineering, Volume 77, Pp. 131-139, 2014 (Fourth International Symposium On Infrastructure Engineering In Developing Countries (IEDC-2013); Pakistan, 26-28 December, 2013)
10. M. Imran, N. Shafiq, M. Ibrasim And T. Ayub; “A Review Of RC Beams Strengthened For Flexure, Shear And Torsion Loading”; International Conference On Civil, Offshore & Environmental Engineering (ICCOEE) 2012, 12-14 June, 2012, Kuala Lumpur, Malaysia (ISBN No. 978-983-2271-77-2)
11. T. Ayub, N. Shafiq, M.F. Nurrudin And S.U. Khan; “Numerical Modelling Of High- Strength Ductile Concrete (HSDC) Beams”; International Conference On Civil, Offshore & Environmental Engineering (ICCOEE) 2012, 12-14 June, 2012, Kuala Lumpur, Malaysia (ISBN No. 978-983-2271-77-2)
12. Aslam Faqeer Mohammad, Tehmina Ayub And N S Zafar; “Performance Based Evaluation Of Non-Ductile Reinforced Concrete Frames With And Without Infill”; ACEE - 2010 Conference; Bangkok, Thailand, December 2010
13. A.R. Khan And T. Ayub; “Role Of U-Shaped Anchorages On The Performance Of RC Beams Strengthened By CFRP Plates”; The Second Official International Conference Of International Institute For FRP In Construction For Asia- Pacific Region; South Korea, 9- 11 December, 2009
14. A.R. Khan And T. Ayub, “Performance Of RC Beams Strengthened In Shear By Externally Bonded U-Shaped Wraps”; SBEIDCO – 1 St International Conference On Sustainable Built Environment Infrastructures In Developing Countries ENSET Oran (Algeria) - October 12-14, 2009
15. T. Ayub And S.F.A. Rafeeqi; “Performance Of Reinforced Concrete Beams Containing Steel Fibres”; 5th International Specialty Conference On “FIBRE REINFORCED MATERIALS”, 28-29th August, 2008, Singapore, Pp. 51-58 [ISBN: 978-981-0804-13-8]

Dr. Muhammad Aslam Bhutto

Journal Publication

1. Rafi, M.M., Khan, S. and Bhutto, M.A. (2023) Assessment of Mechanical Properties of Adobe Masonry, Journal of Materials in Civil Engineering (Review completed; ready for publication)

2.   Khan, S.U., Ayub, T., Bhutto, M.A., and Mustafa, A. (2023) Utilization of Tannery waste in Concrete, International Journal of Civil Engineering (Submitted in Dec 2022; under review)

3.   Rafi, M.M. and Bhutto, M.A. (2023) Comparison of performance of analytical models for prediction of shear strength of steel plate girders, Structures and Buildings (Proceedings of the ICE) (Submitted in Aug 2022; under review).

4.   Bhutto, M.A. and Rafi, M.M. (2023) Strengthening of slender webs of steel plate girders using fibre reinforced polymer composites, Journal of Composites for Construction (Submitted in May 2022; under review)

5.   Bhutto, M.A., Nasir, M., and Marri, A. (2023) Impact Assessment of Construction Materials used in Water Supply & Sewerage Infrastructure, International Journal of Business and Management Sciences (Accepted for publication).

6.   Bhutto, M.A., Khan, A. and Marri, A. (2023) Inflation and Its Impact on Highway Construction Materials, International Journal of Business and Management Sciences, (Accepted for publication)

7.   Bhangwar, S.N., Memon, A.H., Bhutto, M.A., Rahman, I.A. and Memon, F.A. (2022) Risk Level of the Types and Causes of Claims in Construction Projects of Pakistan, Quaid-E-Awam University Research Journal of Engineering, Science & Technology, 20(01), 13-20.

8.   Bhutto, M.A., Ahmed, K. and Aamir. M.U.B. (2022) Production and Optimization of Self-Healing Concrete by Using Indigenous Bacteria. International Journal of Biology and Biotechnology, 19 (4): 561-568.

9.   Khan, H.M., Waseemullah, Bhutto, M.A., Khan, S.M. & Baig, M.A. (2022) Analysis of 3D Building Construction Applications in Augmented Reality. International Journal of Computer Science and Network Security, 22(10), 340- 346.

10. Kisaezehra, Farooq, M.U., Bhutto, M.A. & Kazi, A.K. (2022). Real-Time Safety Helmet Detection Using Yolov5 at Construction Sites. Intelligent Automation & Soft Computing, 36(1), 911-926

11. Beg, T., Siddiqui, M. O. R., Bhutto, M. A., Iqbal, K., & Sun, D. (2022). Utilization of textile denim sludge waste in high load-bearing structural applications. Polimery, 67(7-8), 298-307.

12. Rafi, M.M., Bhutto, M.A., and Aziz, T. (2022) Study of Strength and Durability Characteristics of Concrete Mixes Made by Unwashed Sea Sand as Fine Aggregates (2022) Advances in Civil Engineering Materials, 11(1), 321-338

13. Jakhrani, N. H., Mukwana, K. C., Bhutto, M. A., Mangi, D. M., & Hafeez, M. (2021). Analysis of the Physicochemical Characteristics of Distillery Wastewater at Habib Sugar Mills, Nawabshah. Engineering, Technology & Applied Science Research, 11(6), 7788-7792.

14. Jakhrani, A. Q., Jakhrani, S. H., Bhutto, M. A., Jatoi, A. R., Sandilo, U. G., & Ahsan, M. J. (2021). Performance Analysis of Solar Water Pumping System at Nawabshah. Quaid-E-Awam University Research Journal of Engineering, Science & Technology, Nawabshah., 19(2), 49-53.

15. Jakhrani, A. Q., Jatoi, A. R., Bhutto, M. A., Sahito, W. S., Soomro, A., & Shar,N. Z. (2021). Groundwater Quality Analysis of Different Villages in Two Union Councils of District Tando Muhammad Khan. Quaid-E-Awam University Research Journal of Engineering, Science & Technology, Nawabshah., 19(2), 8- 14.

16. Bangwar, D. K., Saand, A., Bhutto, M. A., Zardari, M. A., & Keerio, M. A. (2019). Reducing the Effect of Carbonation and Corrosion in Rice Husk Ash Concrete by Incorporating Polymer. Tehnicki Vjesnik-Technical Gazette, 26(3), 881-884.

17. Memon, A. H., Soomro, M. A., Lakho, N. A., Memon, A. N., & Bhutto, M. A. (2018). A Survey on the Criteria for Measuring the Profitability of a Construction Organization. Engineering, Technology & Applied Science Research, 8(3), 2879- 2881.

18. Memon, M. A., Bhutto, M. A., Lakho, N. A., Halepoto, I. A., & Memon, A. N. (2018). Effects of uncrushed aggregate on the mechanical properties of no-fines concrete. Engineering, Technology & Applied Science Research, 8(3), 2882-2886.

19. Memon, N. A., Larik, A. H., Bhutto, M. A., Lakho, N. A., Memon, M. A., & Memon, A. N. (2018). Effect of Prepackaged Polymer on Compressive, Tensile and Flexural Strength of Mortar. Engineering, Technology & Applied Science Research, 8(3), 3044-3047.

20. Jawaid, S., Ahmed, K., & Bhutto, M. A. (2018). Bio concrete: an overview. Int J Biol Biotech, 15(4), 801-813.

21. Memon, N.A., Abro, F.R., Bhutto, M.A. and Sumadi, S.R. (2015) Marble powder as stabilizer in natural clayey soils, Science International Journal, 27(5), p 4105- 4110

22. Ansari, A.A., Bhutto, M.A., Bhatti, N.K., and Memon, R.A. (2015) Strength of wall-slab junction with new form of shear reinforcement in a laterally loaded tall shear wall building, Journal of Civil Engineering and Architecture, 9(2), p193- 206.

23. Memon, N.A., Keerio, N.U., Bhutto, M.A. and Sumadi, S.R. (2014) Experimental study of compressive strength of resin grout with marble powder, European International Journal of Science and Technology (EIJST), 3(4), p87-95

24. Jatoi, A.R., Samo, S.R., Abbasi, H. and Bhutto, M.A. (2014) Monitoring and assessment of noise pollution: Case study of Cantonment railway station Karachi, Pakistan, Sindh University Journal of Research (Science Series), 46(1), p59-62

25. Bhutto, M.A., Ansari, A.A. and Memon, N.A. (2013) Prediction of behaviour of steel plate subjected to shear, International Journal of Engineering and Advanced Technology (IJEAT), 10(10), p1-5.

26. Ansari, A.A., Bhatti, N.K. and Bhutto, M.A., (2013) Suitability of pre-perforated post-reinforced baked clay beam panels for low cost housing, American Journal of Civil Engineering, 1(1), p6-15.

27. Ansari, A.A., Bhutto, M.A., and Bhatti, N.K. (2013) Mechanical system developed for performance evaluation of reinforced baked clay structural panels, International Journal of Emerging Technology and Advanced Engineering, 3(5), p791-797.

 

Dr. Abdul Salam Buller

Journal Publication

1.   Buller, A. S., Abro, F.R., Lee, K. M., & Jang, S. Y. (2019). “Mechanical Recovery of Cracked Fiber-Reinforced Mortar Incorporating Crystalline Admixture, Expansive Agent, and Geomaterial". Advances in Materials Science & Engineering. (SCIE, I.F=2.09)

2.   Buller, A. S, Abro, F.R, Ali, T, Jakhrani, S. H, Buller, A.H, Abdin, Z. U. "Stimulated autogenous-healing capacity of fiber-reinforced mortar incorporating healing agents for recovery against fracture and mechanical properties" Materials Science-Poland, vol.39, no.1, 2021, pp.33-48. (SCIE, I.F=0.90)

3.   Abro, F.R.; Buller, A.S.; Lee, K.-M.; Jang, S.Y. “Using the Steady-State Chloride Migration Test to Evaluate the Self-Healing Capacity of Cracked Mortars Containing Crystalline, Expansive, and Swelling Admixtures”. Materials 2019, 12, 1865. (SCIE, I.F=3.74)

4.   Abro, F.u.R.; Buller, A.S.; Ali, T.; Ul-Abdin, Z.; Ahmed, Z.; Memon, N.A.; Lashari, A.R. “Autogenous Healing of Cracked Mortar Using Modified Steady-State Migration Test against Chloride Penetration”. Sustainability 2021, 13, 9519. (SCIE, I.F=3.88)

5.   Ali, T., Buller, A. S., Ahmed, Z., Shabbir, S., Lashari, A. R., & Hussain, G. (2022). “Investigation on Mechanical and Durability Properties of Concrete Mixed with Silica Fume as Cementitious Material and Coal Bottom Ash as Fine Aggregate Replacement Material”. Buildings, 12(1), 44. (SCIE, I.F=3.80)

6.   Ali, T.; Saand, A.; Bangwar, D.K.; Buller, A.S.; Ahmed, Z. “Mechanical and Durability Properties of Aerated Concrete Incorporating Rice Husk Ash (RHA) as Partial Replacement of Cement”. Crystals, 2021, 11, 604. (SCIE, I.F=2.70)

7.   Ali, Y., Irfan, M., Buller, A. S., Khan, H. A., & Gul, H. M. (2019). “A binary logistic model for predicting the tertiary stage of permanent deformation of conventional asphalt concrete mixtures”. Construction and Building Materials, 227, 116608. (SCIE, I.F=7.69)

8.   Ali, Y., Hussain, F., Irfan, M, Buller, A. S. (2021). “An eXtreme Gradient Boosting Model for Predicting Dynamic modulus of Asphalt Concrete Mixtures”. Construction and Building Materials 295 (2021) 123642. (SCIE, I.F=7.69)

9.   Lashari, A. R., Ali, Y., Buller, A. S., & Memon, N. A. (2022). “Effects of partial replacement of fine aggregates with crumb rubber on skid resistance and mechanical properties of cement concrete pavements”. International Journal of Pavement Engineering, 1-11. (SCIE, I.F=4.17).

10. Inam, M. A., Khan, R., Yeom, I. T., Buller, A. S., Akram, M., & Inam, M. W. (2021). “Optimization of antimony removal by coagulation-flocculation-sedimentation process using response surface methodology”. Processes, 9(1), 117. (SCIE, IF=3.35)

11. Buller, A. S., Ali. T, Abro, F. U. R., Shabbir. S, & Mastoi. S. (2022). “Effect of Silica Fume on Mechanical and Durability Performance Evaluation of Concrete”. QUEST-Research Journal, (Accepted for Publication)

12. Buller, A. S., Buller, A. M., Ali, T., Tunio, Z. A., Shabbir, S., & Malik, M. A. (2021). “Experimental Characterization of Bacterial Concrete Against Mechanical and Durability Performance. Engineering”, Technology & Applied Science Research, 11(1), 6703-6707.

13. Tunio, Z. A., Ali, T., Buller, A. S*., Abro, F. U. R., & Abbasi, M. A. (2019). “Influence of Coarse Aggregate Gradation on the Mechanical Properties of Concrete, Part I: No-Fines Concrete”. Engineering, Technology & Applied Science Research, 9(5), 4612-4615.

14. Gilani, E., Soomro, M. A., Ali, T., Sahito, A. A., & Buller, A. S. (2020). “Effect of Stress Relief on Pile Capacity in Soft Clay”. Indian Journal Of Science And Technology, 13(09), 1089-1097.

15. Memon, B. A., Oad, M., Buller, A. H., Shar, S. A., & Buller, A. S. (2019). “Effect of Mould Size on Compressive Strength of Green Concrete Cubes”. Civil Engineering Journal, 5(5), 1181-1188.

16. Buller, A. H., Memon, B. A., Buller, A. S., & Sodhar, I. N. “Modeling Fire Effect of Reinforced Recycled Aggregate Concrete Beams by Regression Analysis”. International Journal on Emerging Technologies 12(1): 97-102(2021).

17. Sodhar, I. N., Buller, A. H., Jalbani, A. H., & Buller, A. S. “Influence of COVID-19 on Study”. Journal of Critical       Review, No. 01, Vol. 8, 2021.

18. Mastoi, S., Kalhoro, N. B., Mugheri, A. B. Buller, A.S, M., Rajput, U. A., Mastoi, R. B., & Mastoi, N. (2021). “A Statistical Analysis for Mathematics & Statistics in Engineering Technologies (Random Sampling). International Journal of Management, 12(3), 416-421.

19. Mastoi, S., Mugheri, A. B. M., Kalhoro, N. B. & Buller, A.S (2020). “Numerical solution of Partial differential equations (PDE’s) for nonlinear Local Fractional PDE’s and Randomly generated grids”. International Journal of Disaster Recovery and Business Continuity, 11(01), 2429-2436.

 

Conference Publication

1.   Buller, A.S.; Abro, F.R.; Ali; Jakhrani, S.H and Buller, A.H., “Mechanical Performance Evaluation of Fiber Reinforced Mortar Incorporating Self-Healing Agents,” in 8th International conference of Asian Concrete Federation, Fuzhou, China, 2018, pp. 1161–1165.

2.   Buller, A.S.; Lim, M.J.; Abro, F. R.; and Lee, K.M., “Evaluation of Self-Healing Performance of Fiber Reinforced Mortar Incorporating PVA Fibers PVA,” in Proceedings of the Korean Concrete Institute Conference, Andong, Republic of Korea, November 2017.

3.   Abro, F. R.; Buller, A. S.; Jang, S. Y.; and Lee, K. M., “Evaluation of Self-healing Capacity of Cracked Mortars Incorporating Self-Healing Materials Regarding the Resistance to Chloride Penetration and Water Permeation” In the proceedings of 7th International conference on self-healing materials (ICSHM 2019), Yokohama, Japan, 2019 June 03-05, 2019.

4.   Abro, F. R.; Buller, A.S.; Jang, S.Y.; and Lee, K.M., “Chloride Migration Coefficient of Cracked Mortar Incorporating Self- Healing Mate-rials” In the proceedings of International Conference on Sustainable Materials, Systems and Structures (SMSS 2019), Rovinj, Croatia, Mar. 20-22, 2019.

5.   Abro, F. R.; Buller, A.S.; Jang, S.Y.; and Lee, K.M., “Evaluation of self-healing capacity of cracked mortars by the steady-state chloride migration tests,” in Sustainable Built Environment (SBE), Seoul, South Korea, December 2019.

6.   Abro, F. R.; Buller, A.S.; Jang, S.Y.; and Lee, K.M., “Chloride Ion Migration Coefficient of Cracked Mortar Specimens Using Steady-State Migration Test Method” The 8th international conference of Asian concrete foundation (ACF 2018), Fuzhou, China, Nov 4-7, 2018.

Engr. Farhan Ahmed Shaikh

1.   Yousfani, A.M.; KAMADA, T; KISHI, T; Shaikh, F.A. Incorporation of Bokashi Fermented Leaves (BFL) to improve the Algal Growth on Concrete Surface. Eng. Proc. 2022 (Accepted in MDPI, Engineering Proceeding)

2.   Ahmed, F., Kumar, A., Hussain Rizvi, S., & Ahmed, S. (2021). Alkali-Silica Reactivity of Aggregates in Hyderabad-Jamshoro Region. International Research Journal of Modernization in Engineering Technology and Science, 03(02), 686–691. www.irjmets.com

3.   Ahmed, S., Kumar, A., Rizvi, S. H., Ahmed, F., & Shahzeb. (2021). Early Stage Compressive Strength of Self Curing Concrete Enhanced with Polyethylene Glycol. IJSRD - International Journal for Scientific Research & Development, 8(12), 158–160.

4.   Khuwaja, S., Kumar, A., Rizvi, S. H., Magsi, S., & Shaikh, F. (2021). Early Stage Performance of Self-Curing Concrete Using Poly Vinyl Alcohol. International Research Journal of Engineering and Technology (IRJET), 08(02), 1029–1034.

 

 

Engr. Mohsin Ali

1.   Aqsa Murad, Mohsin Ali, Aneel Kumar, Sadaqat Ullah Khan, Tehmina Ayub, “Parametric study on the Compressive Strength of Fly ash based Geopolymer Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.

2.   Mohsin Ali, Aqsa Murad, “Effect of fly ash and silica fume on compressive strength of Autoclave aerated Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.

3.   Aqsa Murad, Aneel Kumar and Mohsin Ali, “The way of production of Metakaolin from natural material Soorh for Geopolymer Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 205-210.

4.   Mohsin Ali, Aneel Kumar, Rabindar Kumar, Aqsa Murad, “Utilization of Fly ash and Indus River Sand in Autoclaved Aerated Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 197-204.

 

Engr. Aqsa Murad

5.   Aqsa Murad, Mohsin Ali, Aneel Kumar, Sadaqat Ullah Khan, Tehmina Ayub, “Parametric study on the Compressive Strength of Fly ash based Geopolymer Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.

6.   Mohsin Ali, Aqsa Murad, “Effect of fly ash and silica fume on compressive strength of Autoclave aerated Concrete”. 12th International Civil Engineering Conference (ICEC-2022) “Integrating Technology in Civil Engineering” March 20, 2022, Karachi, Pakistan.

7.   Aqsa Murad, Aneel Kumar and Mohsin Ali, “The way of production of Metakaolin from natural material Soorh for Geopolymer Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 205-210.

8.   Mohsin Ali, Aneel Kumar, Rabindar Kumar, Aqsa Murad, “Utilization of Fly ash and Indus River Sand in Autoclaved Aerated Concrete”, Proceedings of the 3rd International Conference on Chemical Engineering (ICCE2021), Mehran University of Engineering and Technology, Jamshoro, September 22-23, 2021, 197-204.

9.   Aqsa Murad, Muhammad Hassan, Aneel Kumar, “Seismic analysis of a High-Rise building: A case study”. 2nd International Conference on Sustainable Development in Civil Engineering 5th – 7th, December, 2019, (ICSDC2019).

 

Engr. Waqas raza

1.   Raza W., Farooqui R., Saqib M., and Ahmmed R. R. (2022) “Identifying Building Information Modeling Potential for Construction Dispute Avoidance and Resolution” Presented at 12th International Conference on Construction in the 21st Century (CITC-12)

 

Engr. Syed Muhammad Yasir Ashrafi

2.   Identification of Major Risk Events for Construction Industry Ashrafi, S., Farooqui, R. U. and Saqib, M. Presented at “Construction in 21st Century 12” Aman, Jordan, May 16-19, 2022

3.   Water and Energy Retrofitting – A Case Study of Community Building Ashrafi, S., Farooqui, R. U. and Saqib, M. Presented at “Construction in 21st Century 12” Aman, Jordan, May 16-19, 2022